Chinese  |  English
Hotline:+86-755-26656750
HD Video
HD-SDI/3G-SDI Video to Fiber ConverterHDMI/DVI/DP/USB Active Optical CableHDMI/DVI/VGA/KVM Video to Fiber ConverterHD TVI/CVI/AHD Video to Fiber ConverterVideo/Data/Audio/Contact Closure/Ethernet/Telephone to Fiber Converter
Contact Us
TEL:+86-755-26656750
FAX:+86-755-26407582
E-Mail:sales@holinktech.com
ADD:5 Floor A3,Xuxingda Industrial Zone,Zhoushi Rd,Shiyan Town,BaoAn,Shenzhen,China
You are here:Home > HD Video > P/N : HL-4USB-T/RL
P/N : HL-4USB-T/RL
4 Port USB 2.0 Fiber Optic Extender,the device includes a transmitter and a receiver, which can extend USB 2.0 device to a remote location over 1 fiber cable, max distance 250m (SM or MM fiber cable). An integrated four port hub allows for extension of up to four USB devices without the need for an additional hub. The device can be widely used in military command and control system, police command and control system, traffic management system, energy and electricity supply industry, government office, medical system, commercial presentation, multimedia and public utilities etc.
    
Product Details

Features 

1, Max extension distance 250m (SM or MM fiber cable).
2, Single/Duplex fiber transmission, pure hardware design, no driver needed, compatible with all operation systems, support plug and play
3, Auto recognition of High-speed25Mbps480Mbps)、Full-speed500Kbps12Mbps)、Low-speed10Kbps1.5MbpsUSB device.
4, Support USB1.1 and USB 2.0 devices, cameras, printers, U disk, scanners, audio devices, touch screens, game controllers, mouse and keyboard, etc.


Product Specification

Optical

Connector

SM/MM  SC/FC/ST/LC

Wave length

1310nm/1550nm

Physical

Size (L× W ×H)

104mm x104mm x28mm

Case

Aluminum

Color

Black

N.W.

0.75Kg

Power

Voltage

5~12V DC

Sender power consumption

<20W

Receiver power consumption

<5W ,Powered by USB cable, no external power adapter required

Environment

Working temperature

-20℃-75

Storage temperature

-40-85℃

Humidity

0-95% (non-condensing)

 

USB interface(Type A)

RX

1, connect to PC

TX

4 , connect to USB devices, max 500mA

Note

When the fiber and data are connected, the F & D indicator flash, otherwise off. Then the USB indicator is on when the transmitter is plugged into the USB device, otherwise off. If the indicator is not normal, need to re-plug the USB device.

If the total power consumption of the USB device on the device side exceeds 8W, it is recommended that the USB device must use an external power supply. Otherwise, after calculating the power loss, reselect the power adapter of the extender.

 

  Panel diagram

 



Connection diagram


 


Copyright © 2015-2025 Shenzhen Ho-link Technology Co., Limited All Right Reserved    粤ICP备20068946号
Live chat
I'm online